The One is the ultimate all-rounder; pure all-mountain freestyle perfomance which carves fantastically on the piste though man enough to tackle deep powder and the rough stuff. The ample side cut and torsional rigidity grips the walls of the pipe, whilst also allowing you to ride the whole mountain knowing that you are stable at speed. With its 175mm long tip and tail, 119/89/113mm dimensions and relatively stiff construction, the One is a truly versatile ski for all terrain and conditions.

Base: ISO 7200 sintered, die cut

Dims: 119/89/113

Lengths: 166, 173, 180

Radius: 16m, 18m, 19m

Effective Edge: 146cm, 152cm, 158cm

Tip/Tail Lengths: 175mm, 175mm

Edge Angle: 1=3

Core: Poplar/Ash Laminate

Sidewalls: ABS

Edge: 1.8mm steel, 360°

Camber: 12mm

Topsheet: Screen Printed & Lacquered

Weight (pair): 3.5kg, 3.6kg, 3.7kg

Mounting: 3.6mm x 9mm drill bit

Ski Construction:

Made in Europe

Topsheet: Screen printed & lacquered (3x layers) Dry-weave binding retention plate 800g p/Sq.m Bi-Axle Fibreglass 800g p/Sq.m Tri-Axle Fibreglass Carbon fibre Kevlar stringers

Core: Poplar/Ash Core - vertically laminated with Ash strategically placed for extra binding retention ABS sidewalls (10°) 800g p/Sq.m Tri-Axle Fibreglass Carbon fibre Kevlar stringers Rubber foil dampening tape 1.8mm, 360 hardened Steel edge

Base: 1.2mm ISO 7200 sintered, die-cut base

The ultimate all-mountain fat ski that gives massive amounts of float in the fresh, though the positive camber and full length torsional stiffness allows for an incredible edge hold on even the hardest of pistes.

Designed with a 155 wide tip allowing for a weight forward stance for ease of turn initiation and contact point forward tapered tip to avoid hooking in the soft stuff.

From tree runs to the biggest back bowls to the last piste home, these skis will put a grin on your face!
 
 
    
Base: ISO 7200 sintered, die cut

Dims: 155/112/133

Lengths: 169, 179, 189

Radius: 14m, 16.5m, 19m

Effective Edge: 149cm, 158cm, 166cm

Edge Angle: 1=3

Core: Poplar/Ash Laminate

Sidewalls: ABS

Edge: 1.8mm steel, 360°

Camber: 10mm

Topsheet: Screen Printed & Lacquered

Weight (pair): 3.9kg, 4.3kg, 4.7kg

Mounting: 3.6mm x 9mm drill bit

 
Ski Construction:

Made in Europe

Topsheet: Screen printed & lacquered (3x layers), Dry-weave binding retention plate, 800g p/Sq.m Bi-Axle Fibreglass, 800g p/Sq.m Tri-Axle Fibreglass, Carbon fibre Kevlar stringers

Core: Poplar/Ash Core- vertically laminated with Ash strategically placed for extra binding retention, ABS sidewalls (10°), 800g p/Sq.m Tri-Axle Fibreglass, Carbon fibre Kevlar stringers, Rubber foil dampening tape, 1.8mm, 360 hardened Steel edge

Base: 1.2mm ISO 7200 sintered, die-cut base